Development Design of Fin Hull Traditional Fishing Vessel for Activities

Authors

  • Samuel Febriary Khristyson Universitas Diponegoro
  • Mohd. Ridwan Universitas Diponegoro
  • Hutama Hanggara Satuhu Universitas Diponegoro
  • Ridho Wahyu Pramono Universitas Diponegoro
  • Arjuna Diestiaputra Musyaffa Universitas Diponegoro

DOI:

https://doi.org/10.33019/ppdh3986

Keywords:

Stability, Fins, Traditional Fishing Vessel

Abstract

Ship development is necessary to boost marine activities in a number of coastal locations, such as the performance of ship propulsion systems or the creation of rolling and pitching motion designs. similar to how a representational design concept performs on a ship. The goal of this development design of fin for traditional community activities is to develop traditional fishing boat models with different standard sizes fin in comparison to earlier research. The comparison's findings will be used to compare ship stability outcomes based on the best circumstances for the shipping region. In order to calculate the ship's turning arm approach, it is required to consider the ship's weight in addition to the stability calculation findings. The value of the top equilibrium point to the force of gravity varies depending on the ship situation where the critical angle of maximum roll is at 60 degrees. When the ship is completely laden, the highest equilibrium point's distance varies by 11%. The distance between the ship's gravity point and upper equilibrium point decreases for both ships with and without fins when the roll angle is at its maximum. Design illustrates that while designing a ship with fin for shallow waters, there are a number of elements to take into account, including the ship's maximum speed and stability, useful for fishing operations.  According to the hull's design, pre-planning costs are not excessively expensive and demonstrate the efficiency of production time.

Downloads

Download data is not yet available.

References

[1] B. W. Ziliwu, “STUDI KONSUMSI BAHAN BAKAR SOLAR PADA MESIN INDUK KM. FORTUNA,” Mach. J. Tek. Mesin, vol. 8, no. 2 SE-, Oct. 2022, doi: 10.33019/jm.v8i2.3015.

[2] W. Xu, J. Jiao, G. Xu, M. Zhang, and Y. Zou, “Intelligent control of flap-type fin stabilizer for ship roll motion reduction,” Ocean Eng., vol. 323, p. 120630, 2025, doi: https://doi.org/10.1016/j.oceaneng.2025.120630.

[3] M. Koričan, N. Vladimir, N. Hadžić, and V. Ložar, “Life-cycle cost assessment of hull protection technologies considering their effect on the environmental friendliness of fishing vessels,” Mar. Pollut. Bull., vol. 209, p. 117137, 2024, doi: https://doi.org/10.1016/j.marpolbul.2024.117137.

[4] S. Ma’arif, M. A. Budiyanto, Sunaryo, and G. Theotokatos, “Progress in hybrid and electric propulsion technologies for fishing vessels: An extensive review and prospects,” Ocean Eng., vol. 316, p. 120017, 2025, doi: https://doi.org/10.1016/j.oceaneng.2024.120017.

[5] M. Gil, J. Montewka, and P. Krata, “Predicting a passenger ship’s response during evasive maneuvers using Bayesian Learning,” Reliab. Eng. Syst. Saf., vol. 256, p. 110765, 2025, doi: https://doi.org/10.1016/j.ress.2024.110765.

[6] S. Bairami-Khankandi, V. Bolbot, A. BahooToroody, and F. Goerlandt, “A systems-theoretic approach using association rule mining and predictive Bayesian trend analysis to identify patterns in maritime accident causes,” Reliab. Eng. Syst. Saf., vol. 258, p. 110911, 2025, doi: https://doi.org/10.1016/j.ress.2025.110911.

[7] S. Liu, X.-J. Cui, and C. Lyu, “Analysis and prediction of fishing capacity of marine fishing vessels based on generalized additive models,” Fish. Res., vol. 282, p. 107268, 2025, doi: https://doi.org/10.1016/j.fishres.2025.107268.

[8] M. Sun, H. Ye, J. Liu, T. Luan, and H. Lian, “Analysis of lift-drag characteristics and design of collaborative anti-rolling control system for variable-diameter Magnus rotating roll stabilizer,” Ocean Eng., vol. 324, p. 120713, 2025, doi: https://doi.org/10.1016/j.oceaneng.2025.120713.

[9] H. Bao, Y. Wang, H. Zhu, X. Li, and F. Yu, “Numerical and experimental analysis of motion control of offshore fishing unmanned underwater vehicle in ocean environment,” Ocean Eng., vol. 295, p. 116886, 2024, doi: https://doi.org/10.1016/j.oceaneng.2024.116886.

[10] D. Yang, X. Li, and L. Zhang, “A novel vessel trajectory feature engineering for fishing vessel behavior identification,” Ocean Eng., vol. 310, p. 118677, 2024, doi: https://doi.org/10.1016/j.oceaneng.2024.118677.

[11] Y. Zhang, X. Huang, X. Chen, B. Liu, X. Kong, and Q. Deng, “Optimal configuration and three-dimensional light field of fishing lights on a squid fishing boat obtained using a space matrix algorithm,” Fish. Res., vol. 281, p. 107223, 2025, doi: https://doi.org/10.1016/j.fishres.2024.107223.

[12] M. Iqbal, M. Terziev, T. Tezdogan, and A. Incecik, “Hull form optimisation to minimise the total resistance and dynamic responses of small fishing vessels,” Ocean Eng., vol. 321, p. 120357, 2025, doi: https://doi.org/10.1016/j.oceaneng.2025.120357.

[13] W. Xu, M. Li, G. Xu, J. Jiao, and H. Liu, “Study on the intelligent anti-roll control of a ship at zero speed based on flapping fins,” Ocean Eng., vol. 319, p. 120263, 2025, doi: https://doi.org/10.1016/j.oceaneng.2024.120263.
[14] L. F. Calvo, M. E. Diego, and M. Astolfi, “Techno-economic analysis of a novel clc reactor-based system for energy storage and back-up power in a cruise ship,” Energy Convers. Manag. X, vol. 26, p. 100885, 2025, doi: https://doi.org/10.1016/j.ecmx.2025.100885.

[15] K. Kadriadi et al., “DESIGN AND CONSTRUCTION OF GEAR WHEEL ALIGNMENT SETTING TOOLS AS A LEARNING MEDIA IN THE MACHINE REPAIR AND MAINTENANCE LABORATORY,” Mach. J. Tek. Mesin, vol. 9, no. 2 SE-, Nov. 2023, doi: 10.33019/jm.v9i2.4509.

[16] H. Tira and M. Zulfikar, “DESIGN OF TAPERED WIND TURBINE USING VARIOUS NACA 24112 AIRFOILS IN SEMAYAN VILLAGE CENTRAL LOMBOK REGENCY,” Mach. J. Tek. Mesin, vol. 10, no. 2 SE-, Nov. 2024, doi: 10.33019/jm.v10i2.4704.

Downloads

Published

2026-11-20

How to Cite

Development Design of Fin Hull Traditional Fishing Vessel for Activities. (2026). Machine : Jurnal Teknik Mesin, 12(2), 87-92. https://doi.org/10.33019/ppdh3986